Results 1 to 7 of 7

Thread: Standalone logging not working on MPVI Pro

  1. #1
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    36

    Standalone logging not working on MPVI Pro

    I upgraded the MPVI Pro that had all of my licenses to an MPVI 2. I've got another MPVI Pro that I want to do standalone logging with until that is available on the new interfaces, but this MPVI Pro isn't doing it. I did the Write Config for my 03 Avalanche, hit the Record button on the unit while the truck was on, green red came on, hit the stop button after a bit, waited for the busy light to go off, then when trying to read the log when I hit Get Info it doesn't show a log. Interface logs when computer is hooked up. Help!!!

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Standalone datalogging is not enabled on MPVI2 yet.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    36
    Quote Originally Posted by Bill@HPTuners View Post
    Standalone datalogging is not enabled on MPVI2 yet.
    Exactly. That's why I was trying to use an MPVI, not my MPVI 2, to do standalone datalogging.

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Try standalone datalogging just engine RPM in the configuration to see if that at least works.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    36
    It works with just rpm. Guess I've got to trim what I wanted to log to get it to work.

  6. #6
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    36
    Had to eliminate several parameters, but able to log 36.

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by Hoosier Tuner View Post
    Had to eliminate several parameters, but able to log 36.
    yeah thats alot of pids for a 20 year old ecm, try staying around 20-24, I believe the framerates are much better.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"