Results 1 to 2 of 2

Thread: lsa injector data to 0411 pcm

  1. 06-03-2019 #1
    brycedrue
    brycedrue is offline
    Tuner in Training
    Join Date
    Oct 2013
    Posts
    34

    lsa injector data to 0411 pcm

    I bought some "TLF Performnce" 60 lb injectors at 43.5 psi for my lsa supercharged ls1. Not sure how to input injector data into pcm.

    I am using the stock style fuel pressure/filter. Not boost referenced. Technically should flow 67lbs at 54 psi if my theory is correct...

    This chart is all I was supplied. Car runs great with the help from this forum. Duty cycle shows higher than it should be.

    Also, here is a link for their injectors: https://www.ebay.com/itm/Cadillac-20...ss!95252!US!-1
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 06-03-2019 #2
    brycedrue
    brycedrue is offline
    Tuner in Training
    Join Date
    Oct 2013
    Posts
    34
    They have the Bosch logo on em, think they could just be "drilled out" a bit? Anyways, I'll report back with any negative experiences other than the injector data...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »