Hi All,
this is a quick idle log, would someone be willing to look it over and give me their thoughts on it. Quick run down on the truck, its a 71 C10 with a 00 5.3 truck motor, with a LJMS Stage III truck cam and FIC 365CC injectors, long tubes pretty much stock and running the MAF. It's a PSI conversion base tune that I have gone into and changed injector data and attempted the EOIT on. i haven't been able to log AFR's yet with my MPVI2, my pro-link cable should be here tomorrow but at idle they were bouncing between 14.7-16.0. I noticed my idle counts were up around 80-90 and then it quit registering IAC counts.
Any help is appreciated, Thank you.
Idle Log 6-9-19.hplTuning Default.Channels.xmlBase_Tune_MAF_CAM_FIC_365CC_INJ_Rev_3_042619.hpt