I have a gen 3 dbw 5.3 with matching pedal and tac module.
I put a 4l80e in it.
the shop that did my harness did a segment swap on it but I think it has the OS of a vehicle with a adj pedal assy. Im getting 100% butterfly operation at 60%ish pedal position and my pedal position % goes to 150% when im logging. after countless hours trying to figure out the DBW pedal issue ive come to the conclusion that the wrong segment swap was done.
So does anyone have a gen3 dbw fixed pedal position 4l80e file I can use to segment swap again. I know ill have to transfer my tune over after its done.