Results 1 to 10 of 10

Thread: EEC Update

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,292

    EEC Update

    Today's beta build should correct some editing issues that were reported, where some changes were not seeming to take effect.

    Please report back any issues related to this, IN THIS THREAD.

    Thanks,

    Eric
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Tuner in Training
    Join Date
    May 2019
    Posts
    28
    how to update the software? \Thanks

  3. #3
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,292
    Go to https://www.hptuners.com/downloads/ and download the BETA
    Eric Brooks
    HP Tuners, LLC

  4. #4
    Tuner in Training
    Join Date
    May 2019
    Posts
    28
    there is any new update about cars specially in nissan?or there is add some cars features?

  5. #5
    Potential Tuner
    Join Date
    Dec 2018
    Location
    Alabama
    Posts
    6
    Still unable to read 1998 F-150 4X4 4R70W. Validate checksum failed error.


    f150.hpt
    VCMSuiteInfo.txt

  6. #6
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,292
    Quote Originally Posted by Biscuit View Post
    Still unable to read 1998 F-150 4X4 4R70W. Validate checksum failed error.


    f150.hpt
    VCMSuiteInfo.txt
    Support for those has not been released yet.
    Eric Brooks
    HP Tuners, LLC

  7. #7
    Potential Tuner
    Join Date
    Dec 2018
    Location
    Alabama
    Posts
    6
    Ahh, that would explain it then. Thanks.

  8. #8
    Potential Tuner
    Join Date
    Feb 2019
    Posts
    2
    Just download the latest beta and seems to be data logging.. I'll be sure to drive the car and see forsure over time . Thanks Eric at hp

  9. #9
    Potential Tuner
    Join Date
    Sep 2014
    Posts
    2
    Downloaded the Latest beta, working with a 2004 mustang GT 2v at the moment. Before I could only get to 7 seconds of data logging before it quit now I can get to 28 seconds and it just locks up the interface. I have to remove the usb from the MPVI2 and unplug it from the OBD port in order to reset it and be able to connect back to it. I Also only knocked it down to a couple of channels and it didn't seem to help.

  10. #10
    Potential Tuner
    Join Date
    Sep 2014
    Posts
    2
    Another Update, was able to get about 1.5min of log time out of the car. Stopped the log to add a channel and it started for a few then locked up again. We have been needing the scanner to chase an issue on the car. I attached what I was able to log on the car.

    Thank you for the progress you have made so far Eric on this, were pretty excited to use HP on this.

    See attached log.

    firstDecentLog.hpl