-
Potential Tuner
MY aem x series wont log on the scanner.. it stays logging in general without a problem. everything is correct, just as soon as I start recording, it goes away... also it doesn't read knock sensors, being that im street tuning, how will I know how much timing needs to be in it without seeing what the knock sensors pull out
would anyone be able to tell me how to tune the maf without it logging the wideband
-
Advanced Tuner
log the stft and ltft and make a fuel error math. Setup a histogram to plot it over your maf voltage
http://efidynotuning.com/fuel.htm#error