so i am trying to get started tuning my car and i have found some really good write ups but as i start going through them i notice that some tables are not in my editer so at this point i dont know what to do as far as a start up tune ?
so i am trying to get started tuning my car and i have found some really good write ups but as i start going through them i notice that some tables are not in my editer so at this point i dont know what to do as far as a start up tune ?
Switch to advanced view under the edit tab.
You have to say what you are working with and the parts you used if you want help with setting up a tune to get you going.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
ok i have a 2002 camaro stock lower end with a cam springs a 2800 stall and long tube headers my cam is 591 intake 601 exhaust 230 and 236 duration at .050, the motor is a ls1 and 42lb injectors
oh i just saw that you said to switch view thank you i now see all the tables thank you very much
ok i have a new question i havent used hp tuners in quit some time and the scaner has been compleatly redesined so i am looking for the histogram #1 thathas base running airflow vs. ect or how do i set up a graph for this data?