Results 1 to 2 of 2

Thread: Another Egr for AEM wideband question scanner version 4.2.12

  1. #1
    Potential Tuner
    Join Date
    Dec 2013
    Posts
    6

    Another Egr for AEM wideband question scanner version 4.2.12

    Aem wideband using egr.MathParameter.xmlbasic channel config.Channels.xmlbasic graph config.ChartDisplay.xml
    Hi, I have been trying to monitor the wide band through the egr as many others have done. I began attempting after watching the video in the sticky (https://www.youtube.com/watch?v=Ru_2M2uGSKs) but I seem to be unable to get mine to work. I had numbers in the 200s. I tried using another math parameter thinking mine was wrong I found while searching the forum and now I get no readings. I would appreciate a little push in the right direction All of the write ups and videos I can find seem to be an earlier version of the scanner.
    Thanks in advance.
    Last edited by David_56; 06-21-2019 at 09:43 PM.

  2. #2
    Potential Tuner
    Join Date
    Dec 2013
    Posts
    6
    bump, any help with formulas? I cant seem to input any that are close.