-
Potential Tuner
Ls2 map ( e40 )
I've done a lot of research b4 posting this question.. alotnof info is from a couple years ago and just wondering best map sensor option for e40 ecu on an ls2... is DPE the best option? Any help appreciated and part numbers as well would be great... I did initially buy a 3bar tmap but it's not gonna work out ... thanks in advance
Edit for specs....
Ls2 motor .005 over
Callies dragon slayer crank
Molnar power adder plus boost rods
LJMS stage 3 twin turbo cam
Johnson short travel slow leakdown link bar lifters
BTR equalizer intake with fuel rail kit
Bosch 210lbs injectors
Smithbrothers 3/8 pushrods .120 walls 7.580 length
Double roller timing chain setup
Diamond ls2k pistons
10 1:1 compression
Stock rockers with truinion upgrade
Twin 62mm turbos
2 precision turbo 46mm wastegates
JGS 60mm bov
Lev 6 t56 magnum fully built
Gforce 9inch IRS rearend ...
And a turbosmart eboost boost controller
Flex fuel sensor
Last edited by 05lsxGoat; 06-23-2019 at 01:32 PM.
-
Yep. It's almost like that NXP sensor was designed specifically for something with a max of 255kpa and no negative offset allowed (i.e. an E40).