Hello I have a 2017 Camaro ZL1, and I successfully scanned the car and set up 6 PIDS for my viewing pleasure, however 3 of the PIDS are not reading correctly.
Knock reads 0 at all times (I know my tuner is good, but not THAT good..lol
Oil pressure also reads 0 although in car gauge reads around 40 psi
Boost gauge never goes out of vacuum although a small pull up to 13psi via in car gauge said other wise.
While the car was running i inspected all 103 i believe other PIDS and each one of those PIDS did indicate some sort of static or fluid value.
Any advice would be greatly appreciated!
Swift