OK so...
Like the title says...
I am trying to dial in the VE tables on my 2009 G8...
2-bar OS...
When idling in gear with the AC on, the RPM's fall to around 500-600. The car runs like absolute CRAP and I have to place in in P/N to keep it from cutting off. Here's what I've done so far...
Increased minimum airflow
Adjusted VE via results from scanner
Added AC torque
Raised Minimum RPM Reference
Zero'd out AC Torque Reduction
Now in MAF only mode, this DOES NOT happen. Nor does it happen in blended mode.
I'm at a complete loss. Any help will be greatly appreciates. Tune and log attached.
Thanks in advance! Oh... the car specs are in my signature...