Results 1 to 3 of 3

Thread: PATs or FOB problems after flashing 2010 Mustang GT

  1. #1
    Senior Tuner Mep_q8's Avatar
    Join Date
    Mar 2006
    Location
    Kuwait
    Posts
    1,564

    PATs or FOB problems after flashing 2010 Mustang GT

    Car was ruuning fine with no problems, managed to flash it 3 times on the dyno, then all oof a sudden the vehicle would not switch on.

    Security light on and flashing.

    Disabled PATs in flash and still no start.

    Any ideas HP Tuners?

    Bader Norris
    MEP Tuned
    Telephone: +965-55446651
    Email: [email protected]
    Instagram

  2. #2
    Tuner in Training
    Join Date
    Oct 2019
    Posts
    40
    if you just turned off pats in hp tuners then take ids and go to pats and click reconfigure settings there. it just flew the synchronization between ipc and pcm

  3. #3
    Tuner in Training
    Join Date
    Oct 2019
    Posts
    40
    Turning off pats in year 10 is not so simple. and unchecking hp doesn’t help, I just came across this