Cant remove 4L80E torque managment

[lsrado]

I have a 2008 E38 & T42 from a express 2500 van in my turbo 4.8L colorado. I cant for the life of me remove the torque management. i have tried back to stock, zeroing all the tables, but I must be missing something. i am loging ETC, fuel, and spart tq management PIDS and depending on the scenario I am getting all 3 of them but mostly 1 at a time. I will post my tune here but let me know what you guys think.

Thanks

Nicks Colorado 67 trans torque management back to stock.hpt

7.2.19.hpl

[razors4us]

maybe check the torque management settings in the transmission area?

[lsrado]

I have, I tried to zero everything out and am still getting torque management.

[ScarabEpic22]

Look at TCM 15416, 15417, 15418, 15419 still has TM in the tune. Torque Reduction = torque management.

Also need to change the Abuse Mode -> Torque Reduction table.

There are a handful of tables under the Engine TM tab that need to be raised as well. You're hitting your RPM limiter as well in the log, probably where the TM request is coming from. Look at ECM 12050, in gear limits are at 6600 and your log is showing 6700+. If you dont want it shifting that high, you'll need to lower your RPM and VSS shift points in the trans side so it can complete the shift before hitting the limiter.

[Ben Charles]

Don’t zero it out.. put 1s in the values and will fix your problem