Basic 2019 C7 Z06, pulled stock blower for a F1A and headers. As soon at started it went into REP mode. Has codes P0033 and P0034. Can't figure this out. Any help would be greatly appreciated.
07 05 19-2 PC.hpt
Basic 2019 C7 Z06, pulled stock blower for a F1A and headers. As soon at started it went into REP mode. Has codes P0033 and P0034. Can't figure this out. Any help would be greatly appreciated.
07 05 19-2 PC.hpt
GO RAIDERS!!!!!!!!!!
02 C5 Z06
8.8@160
Try choosing ''no error reported" for the codes it will fix it. They appeared because of removing the original bypass valve.
Tried, that no go. Set it to no error reported but it error keeps coming back.Originally Posted by ahmedabri97
GO RAIDERS!!!!!!!!!!
02 C5 Z06
8.8@160
Haven't had a chance to tinker with my LT4 yet. But I've done many LS based cars. But don't you have to disable the supercharger in the tune if you go with an F1A? Torque Management, SC/TC General tab. Then select "none" where you have a choice of turbo/super etc... Since the ecu is no longer controlling anything supercharger related.
Reply With Quote