Results 1 to 5 of 5

Thread: 2 step and throttle closing

  1. #1
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    15

    2 step and throttle closing

    I have an a8 and when I am on the 2 step the throttle is not opening all the way until I get off of brake. Has anyone found a way for the throttle to stay open with foot on the brake?

  2. #2
    My very inexperienced thought is you are probably being limited by brake torque. If you post a log and tune I'm sure someone can give you a better answer.

  3. #3
    Tuner in Training
    Join Date
    Apr 2014
    Posts
    15
    Ok I figured out the throttle part. It goes wot. However there is still that half a second delay before rpms climb. I will post a log.

  4. #4
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    San Antonio, TX
    Posts
    319
    Quote Originally Posted by confused View Post
    I will post a log.
    Post your tune file too.
    JTC Performance - Authorized HP Tuners Reseller
    Remote performance tuning

  5. #5
    Tuner in Training
    Join Date
    Oct 2017
    Location
    Michigan
    Posts
    48
    I just learned how to disable it from having a misfire code. Haven't even looked at the throttle.
    Also how do you have yours wired? Just wired to brake pedal or inline switch?