Results 1 to 6 of 6

Thread: Not license.....

  1. #1
    Tuner in Training dmoore1188's Avatar
    Join Date
    Sep 2014
    Location
    Daytona Beach FL
    Posts
    20

    Not license.....

    I just made mods to my 2011 Escalade. Hooked up my interface spent my last 2 credits to license it. Tried to program and it says you are not licensed for this file. Hmmmmm I disagree, How do I tell the program it is wrong? I was really looking forward to a test drive.... been working on it all day. This SUCKS!!!!
    Attached Images Attached Images
    Attached Files Attached Files

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    If you read the file with the fuel pump control module, this could be why.

    Do a read entire but do not select the fuel pump control module. Only select the E38 computer and TCM to be read.

    Do a copy/paste with your changes to the newly read file and try to flash it.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training dmoore1188's Avatar
    Join Date
    Sep 2014
    Location
    Daytona Beach FL
    Posts
    20
    Thank's.... I'll let you know.

  4. #4
    I had same issue. didn't know to do that either . lol

  5. #5
    Tuner in Training dmoore1188's Avatar
    Join Date
    Sep 2014
    Location
    Daytona Beach FL
    Posts
    20
    @5FDP Thank You.... Time for the Test Drive!! I never would have tried that. I am All Smiles Again!

  6. #6
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    It's more common than you think.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.