Results 1 to 3 of 3

Thread: Options for replacing GT500 Kenne bell Mammouth Dual 75mm TB

  1. 06-17-2020 #1
    Sweet35th
    Sweet35th is offline
    Tuner
    Join Date
    Mar 2015
    Posts
    174

    Options for replacing GT500 Kenne bell Mammouth Dual 75mm TB

    Looking into this for a customer. For the second time now, the brass gears on this steaming pile of shit throttle body are starting to bind when hot, causing high idle and drive away issues. KB repaired/inspected it last time and it was good for about a year. Customer is just sick of it, and I dont blame him. Are there any better options out there that fit the bolt pattern of this excessively large pos?
    Reply With Quote Reply With Quote
  2. 06-17-2020 #2
    SultanHassanMasTuning
    SultanHassanMasTuning is offline
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    i think a Ford Racing unit Mono should do the trick
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161
    Reply With Quote Reply With Quote
  3. 06-17-2020 #3
    Sweet35th
    Sweet35th is offline
    Tuner
    Join Date
    Mar 2015
    Posts
    174
    Quote Originally Posted by SultanHassanMasTuning View Post
    i think a Ford Racing unit Mono should do the trick
    The ford racing Mono is the small (factory GT500) bolt pattern and pretty positive as I have used it on TVS equiped GT500s
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »