So, I ran a log in SD mode to tune my VE from fuel trims.
I have my current VE table, then I copy my Short Term Fuel Trims from the scanner and do a Paste Special > Multiply by & Half.
So Far So Good?
NOW WHAT? I have read to hand-smooth and then log again, but not exactly sure how to hand smooth or frankly, what that even means?
I posted screenshots of my VE table stock and then after pasting in the fuel trims.
Thanks in advance...
P.S. and then going further, Copy(with Axis) to the secondary table?origve.jpgpastedVE.jpg