Results 1 to 3 of 3

Thread: Version 4.4.4 Scanner issue

  1. #1
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774

    Version 4.4.4 Scanner issue

    Greetings.

    I recently upgraded to version 4.4.4. Im using an MPVI2.

    After the upgrade, I noticed some of my channels were black (showing NO value). I thought maybe it was corrupt so I decided to build another channels list (GM E38). I then noticed that as I added more channels, some channels went blank. Has anyone seen this issue or have a resolution? Should I email support?
    Daily Driver= 2003 BMW 330xi
    Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
    Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
    Truck= 2007 Chevy Silverado 1500 LT LY5 4x4

  2. #2
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774
    I contacted support. They instructed me to delete eveything in the \Documents\HP Tuners\VCM Scanner\Vehicles folder. I did so and tested on my ride home yesterday. Issue resolved...
    Daily Driver= 2003 BMW 330xi
    Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
    Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
    Truck= 2007 Chevy Silverado 1500 LT LY5 4x4

  3. #3
    Potential Tuner
    Join Date
    Jan 2017
    Location
    Vancouver Island BC Canada
    Posts
    2

    Missing PIDs

    Quote Originally Posted by jaydubb71 View Post
    I contacted support. They instructed me to delete eveything in the \Documents\HP Tuners\VCM Scanner\Vehicles folder. I did so and tested on my ride home yesterday. Issue resolved...
    I had same issue....this fix worked!