Results 1 to 3 of 3

Thread: 19 Mustang A10 on dyno 6500rpm limiter

  1. #1
    Advanced Tuner
    Join Date
    Dec 2012
    Posts
    235

    19 Mustang A10 on dyno 6500rpm limiter

    It appears this car is closing the throttle at 6500rpm. If I remember correctly the limiter is set at 7500rpm stock. This car is 100% stock, was doing a baseline run in 7th gear, and won't go past 6500rpm. Tried a 6th gear pull, and did the same thing at 6500rpm. I tried it with the connector at the airbox unplugged also. Anybody else run into this?

  2. #2
    Advanced Tuner
    Join Date
    Sep 2010
    Posts
    872
    post the datalog, one thing to keep in mind is you wont hit max rpm in 7th bc it exceeds the factory speed limiter

  3. #3
    There are lots of limits in the trans side that need to raised.