Results 1 to 3 of 3

Thread: XR6 NA to boosted Tmap wiring

  1. #1
    Tuner in Training
    Join Date
    Jun 2009
    Posts
    20

    XR6 NA to boosted Tmap wiring

    Does anyone know what is required to fit the turbo Tmap into the NA harness ? I have read both swapping wires end to end ie 4-1 3-2 2-3 1-4 and I have also read Leave wiring in order and just change plugs? Anyone have a definitive answer?
    Thanks.

  2. #2
    Tuner in Training
    Join Date
    Jun 2009
    Posts
    20
    Found the answer it is reversed from the NA sensor. (the customer supplied adaptor loom was wrong :/)
    attached is the tune all done BF xr6 auto to turbo conversion. running just stock gate 4.5psi and made 210rwkw.
    Attached Files Attached Files

  3. #3
    Tuner in Training
    Join Date
    Aug 2018
    Location
    Mildura, VIC
    Posts
    24
    Yep, wiring is reversed but i was lazy with my car and brought a harness. Original non turbo motor with turbo made 240rwkw on 7psi