Page 2 of 2 FirstFirst 12
Results 21 to 26 of 26

Thread: Cobalt LSJ - boost limited to 3 psi - boost control solenoid - PID for monitoring

  1. #21
    Senior Tuner cobaltssoverbooster's Avatar
    Join Date
    Dec 2008
    Location
    Nevada
    Posts
    4,452
    this one is an 06
    Attached Files Attached Files
    2000 Ford Mustang - Top Sportsman

  2. #22
    If you need an 07 I can provide it. Also GM stage 2 files if you have those injectors.

  3. #23
    Senior Tuner cobaltssoverbooster's Avatar
    Join Date
    Dec 2008
    Location
    Nevada
    Posts
    4,452
    this is the 42lbhr injector data. file is from a 2005 ss but the injector data tables are identical. just copy and paste
    Attached Files Attached Files
    2000 Ford Mustang - Top Sportsman

  4. #24
    Potential Tuner
    Join Date
    Jul 2019
    Posts
    5
    Thanks a ton guys!

    cobaltssoverbooster, also, thanks for your LSJ/LNF tuning videos on youtube, very informative!
    https://www.youtube.com/watch?v=wsQ1...L5S4trpO6F9OLq

  5. #25
    Potential Tuner
    Join Date
    Jul 2019
    Posts
    5
    SSKev: If you need an 07 I can provide it. Also GM stage 2 files if you have those injectors.

    Highly appreciated!

    From: https://forum.hptuners.com/showthrea...SJ-Stock-Tune:
    too start out though i would switch the fueling tables and airflow tables to the 07 because its alot more linear and smoother than the 06 file - look at the injector flow and pe tables and you'll understand what i mean

  6. #26
    Tuner
    Join Date
    Nov 2021
    Location
    Colorado
    Posts
    53
    Quote Originally Posted by xxprotegexx View Post
    Have the same issue. Solenoid at 100% all the time. Only 3psi of boost all the way to 7k. If I bypass I get all the boost. Still cant figure it out.
    100% means the valve is closed, correct?