Results 1 to 5 of 5

Thread: of course more issues

  1. #1

    of course more issues

    ive been trying to get the ve good enough to drive on a 2 bar e38 cammed 4.8, ive been trying to adjust the ve at idle and it doesn't respond to the changes I paste by %- consistent 20% rich, also in the scanner the vehicle controls & special functions don't work. they did before changing to 2 bar. what's going on?
    Attached Files Attached Files

  2. #2
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    You're in closed loop. Disable CL by maxing the O2 readiness ECT table.

    Russ Kemp

  3. #3
    correct me if i'm wrong but the log shows it being in open loop

  4. #4
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    Look at the STFT's, they are not 0.

    Russ Kemp

  5. #5
    thanks for pointing this out, i'm using wideband in pass side/ ive found there are many things that affect fueling, ive been going thru and using a multiple of 1 or disabling= getting closer