spark table help

[cmcnealy]

is there a way to match my spark advance table in the scanner(which is reading RPM VS MANIFOLD ABSOLUTE PRESSURE KPA) to match my editor page
(which reads RPM VS CYLINDER AIR MASS G).IM NEW AND HAVING TROUBLE GETTING TIMING SET WITHOUT JUST GUESSING

[kingtal0n]

Interesting question

can't you just log the cylinder airmass then look at the log and compare with the timing table?
Thats how I've been doing it...

[anniversaryss]

is there a way to match my spark advance table in the scanner(which is reading RPM VS MANIFOLD ABSOLUTE PRESSURE KPA) to match my editor page
(which reads RPM VS CYLINDER AIR MASS G).IM NEW AND HAVING TROUBLE GETTING TIMING SET WITHOUT JUST GUESSING

Just replace MAP with cylinder airmass. Right click on the timing table in editor and copy the units. Then paste it in the scanner area.

Log cylinder airmass

[cmcnealy]

How do i change map to CYLINDER air mass in my scanner page

[cobaltssoverbooster]

right click as mentioned above and enter the graph settings menu. from here you can change axis pids and values