Results 1 to 3 of 3

Thread: Credit questions

  1. #1
    Tuner in Training
    Join Date
    Aug 2017
    Posts
    13

    Credit questions

    working on a 2010 camaro SS 6spd that I read out, "saved" the stock file. Made a few changes, went to "save as" and was prompted to add credits, added credits (2) and completed "save as". I then attempted to write the new file to ecu and it prompts me "unlicensed file" and that i have to purchase credits.. Ive also attempted to rewrite the stock file and the same message "unlicensed file" appears.



    what am i doing wrong or what did i miss

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    26,181
    sounds like you read the FSCM and the software is asking you to license that on flash.

    If you don't want to flash the FSCM do a new read entire and select do not read for that module.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Aug 2017
    Posts
    13
    that was it, thanks