Results 1 to 4 of 4

Thread: GM 6VE1/6VD1 Isuzu engine tune PCM32U

  1. #1
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    2

    GM 6VE1/6VD1 Isuzu engine tune PCM32U

    Dear friends!
    I need help with tune GM 6VE1/6VD1 Isuzu (Trooper, Rodeo, Axiom) engine with ECM PCM32U

    I need edit some parameters of engine and transmission control after swap automatic transmission from 4L30E to AW30-40.

    I upgraded the electrical schematic and now transmission working perfectly.
    But i need edit lock-up control parameters and gearshift chart for better working.
    And some ignition and fuel chart need to be editing, because new transmission can more, than old.

    Can i use MPVI2 and ECULive for this job?

    You can find .bin files in attachment.

    Can you help me?

    What i need to bye for good job?

    Best regards,
    Alex.
    Attached Files Attached Files

  2. #2
    Tuner in Training
    Join Date
    May 2018
    Posts
    26
    hi friends we try to red a Isuzu Luv D-max wich is the same pickup isuzu I-350 (6VE1 also) but can not read ... does anyone do one of this trucks before ? what ecu have to select in order to read ? we apretiate any help

    thanks

    Cesar

  3. #3
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    2
    Hi! I read ECU EEPROM 29800 directly from two different ECMs.
    Firmware attached to last post.

    I have no idea how to calibrate it and what a soft i need to use for this action.

  4. #4
    Potential Tuner
    Join Date
    May 2022
    Posts
    1
    What program did you use to read bin files from eeproms