So I have a wideband hooked up now and I watched the youtube tutorial on how to data log with it
I set it up for the EGR circuit pin 48. White wire from wideband (+ analog) hooked to that pinout, brown wire
( negative) 1st hooked to negative output from pcm for the EGR then just straight to ground. Set up the parameters to log in lambda per the video and info provided with the wideband. When I start the motor and Im logging and the EGR pid shows 0.00 volts and never changes either way I have the ground wire hooked up. In this latest hp software I do not see anyway to turn on or off EGR
Could really use some help. Thanks