Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Toyota 1VD Landcruiser

  1. #1
    Tuner
    Join Date
    Mar 2015
    Location
    gippsland
    Posts
    134

    Toyota 1VD Landcruiser

    Hi all,
    just a couple of questions,
    has anyone done a read and write on a v8 diesel 1VD landcruiser yet?
    if so what a read and write times?
    i have searched high and low for a stock file and cant find anything, would anyone happen to have a stock file around?
    i will be hopefully reading a couple in the next month or so but would just like to see what im getting myself in for.
    thanks heaps

  2. #2
    Tuner in Training
    Join Date
    Jul 2012
    Posts
    32
    Its a virtual read. Write is about 3-5mins.

  3. #3
    Tuner
    Join Date
    Mar 2015
    Location
    gippsland
    Posts
    134
    great thanks for the reply, would you have a stock file by any chance?

  4. #4
    Tuner in Training
    Join Date
    Jul 2012
    Posts
    32
    70 series or 200? send me your email and ill see what i can do.

  5. #5
    Tuner
    Join Date
    Mar 2015
    Location
    gippsland
    Posts
    134
    Pm sent

  6. #6
    Potential Tuner
    Join Date
    Dec 2017
    Posts
    1
    Also after a stock file if possible

  7. #7
    Advanced Tuner
    Join Date
    Feb 2015
    Location
    Perth, Australia
    Posts
    974
    can I also get a stock file please?

    [email protected]

  8. #8
    Advanced Tuner
    Join Date
    Feb 2015
    Location
    Perth, Australia
    Posts
    974
    anyone??

  9. #9
    Potential Tuner
    Join Date
    Nov 2019
    Posts
    6
    goce lancrusier 2019 stock.hpt

    hi this is a stock 2019 79 series landcrusier single turbo 1vdftv engine tune file. i was wondering if anyone could help me out with tuning these cars and i am very familiar with gm and ford stuff but still very fresh on these vehicles any help much appriciated

  10. #10
    Advanced Tuner
    Join Date
    Jul 2009
    Posts
    326
    Stock 200 series tune file
    Attached Files Attached Files

  11. #11
    Potential Tuner
    Join Date
    Apr 2017
    Posts
    2
    I want to open this file, but I get from the vet that there is no definition?
    goce lancrusier 2019 stock.hpt

  12. #12
    Potential Tuner
    Join Date
    Apr 2017
    Posts
    2
    Quote Originally Posted by IH8TOADS View Post
    Stock 200 series tune file
    Writes that there is no authorization!
    How to open ?

  13. #13
    Advanced Tuner
    Join Date
    Jul 2009
    Posts
    326
    Try plugging in your dongle, internet connection and try opening?

  14. #14
    Tuner in Training
    Join Date
    Jun 2020
    Location
    VIC Aust
    Posts
    26
    Hi all, has anyone here had much to do with tuning the 1VD with HP yet ? I have just purchased a dongle and am looking at doing some tuning but not sure where to start

    Any help would be great

    Ben

  15. #15
    Tuner in Training
    Join Date
    Jun 2020
    Location
    VIC Aust
    Posts
    26
    No help ?

  16. #16
    Advanced Tuner IARLLC's Avatar
    Join Date
    Aug 2016
    Posts
    942
    I have not had a chance to compare them yet but I can tell you that the auto trans 200s are programmed to allow A LOT more torque than the manual trans 200s. We can probably start learning by reading both of them and comparing them.

  17. #17
    Tuner in Training
    Join Date
    Jun 2020
    Location
    VIC Aust
    Posts
    26
    Quote Originally Posted by IARLLC View Post
    I have not had a chance to compare them yet but I can tell you that the auto trans 200s are programmed to allow A LOT more torque than the manual trans 200s. We can probably start learning by reading both of them and comparing them.
    We don't have a manual trans version of the 200 in Aust ?

  18. #18
    Advanced Tuner IARLLC's Avatar
    Join Date
    Aug 2016
    Posts
    942
    I have a few customers with manual diesel 200s and 1 with an auto diesel. It might be a few months before I see all of them but I will try to get a read on each of their next visits.

  19. #19
    Advanced Tuner IARLLC's Avatar
    Join Date
    Aug 2016
    Posts
    942
    I had 1 of the manual trans 200s in the shop yesterday and tried to read it. I realize that it will be a virtual read but...
    When I tried to gather info it asked me to type the VIN.
    When I typed the VIN it correctly showed a 2009 200 but a 5.7 gas...obviously not correct.
    It seemed to know my OS but I am not so sure. If it thinks that this is a 5.7 gas, it is probably guessing at the OS as well.

    I searched for info on reading Toyotas and did not get much. I feel like an idiot having to ask but....
    What do I need to do in order to read this thing?

  20. #20
    Tuner in Training
    Join Date
    Jan 2019
    Posts
    24
    I too am finding I can't read the Toyota's. comes up asking for VIN then reads in 1 second and closes the tab?