Results 1 to 5 of 5

Thread: 2020 GT speedo Calibration

  1. #1

    2020 GT speedo Calibration

    2020 GT. Just swapped to 29.5 inch tall rear tires.

    I see the editor and the scanner have options, I tried making the changes In the editor and my speedo did not change at all.

    The scanner says my current gear ratio value is 494.08 I don't know what this number is or how to come up with my new one.

  2. #2
    Senior Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    1,712
    You need to switch to calibration. Normally taken from IPC.

  3. #3
    Quote Originally Posted by veeefour View Post
    You need to switch to calibration. Normally taken from IPC.
    So I switch the "learn from BCM" to "use calibration" and just input the tire sizes? Do I have to do the change in the scanner also? I'll try it when I get home today.

  4. #4
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613
    The scanner now lets you adjust the bcm with special functions, or use Forscan.

  5. #5
    Senior Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    1,712
    Quote Originally Posted by LastPlace View Post
    The scanner now lets you adjust the bcm with special functions, or use Forscan.
    +2018 is a different story, bcm changes with scanner are not so obvious...wont accept certain ratios.