Results 1 to 3 of 3

Thread: 2003 6.0L - Tuning for Inferred EBP Help - Eric@HPT

  1. #1
    Tuner in Training
    Join Date
    Nov 2007
    Location
    Indiana
    Posts
    37

    2003 6.0L - Tuning for Inferred EBP Help - Eric@HPT

    Creation Date: 9/7/2019 12:04:39 AM

    VIN: 1FTNW21P73EB55227
    2003 Ford F-Series Super Duty F-250, 6.0 L, 8 Cyl

    Hardware: Black Oak 448K, Ford
    VIN: 1FTNW21P73EB55227
    OS: VXAP2N2


    I know this strategy uses the inferred EBP sensor. Where would I adjust the tune to change turbo vgt response? I logged w/ scanner but can not find any correlation between VGT duty cycle vs mass fuel desired in the tables accessible to me. PCM commanded VGT duty cycle % do not match the tables Feed Fordward under exhaust pressure or VGT Open Loop DC.

    Is the inferred EBP tables available for editing? Can the tune file re-enable actual EBP reading response? Or am I missing something here. I have not licensed this truck as of yet so I haven't played around with adjusting settings to see what changes.

  2. #2
    Potential Tuner
    Join Date
    May 2018
    Posts
    1
    I' m having this same issue with changing vgt % on my 2006 as well. Does anyone have some suggestions?

  3. #3
    Banned
    Join Date
    Jan 2020
    Location
    Arlington WA
    Posts
    250
    adjust your entire table on max map set entire table to 300.. bump bottom of your inferred map up to around 30-37.