Just got a 102 throttle installed can someone guide me how or what to do in tune settings thanks
Just got a 102 throttle installed can someone guide me how or what to do in tune settings thanks
Is this on your Kubota tractor?
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
What u mean
What year, make and model of car is this on. Is it stock or do you have modifications. Post your tune. Cable or drive by wire throttle body?
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
[ATTACH]93002 My bad 07 z06 fast 102 ported intake, 102 throttle dbw, big cam, longtubes, no cats, halltech cai,160 thermo, thank you.
Last edited by Mani; 09-08-2019 at 09:33 PM.
That's a scan---where is the tune? Got a wideband on that setup?
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
I set it up yesterday works!now i need to figure out how to set it up with tuner, Heres the tune thanks [ATTACH]93039
Go to Engine---Idle---Airflow---ETC Scalar and change to at least 7,300.0000. This works for me, but I have seen some setups as high as 8,000.0000. At least now you know the range. You will have to redo your maf and vve.
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
changed to 5,200.0000 best so far the rest dont know how to change had this tuner for a week so please understand
Thanks for all the help guys seems nobody wants to help unless you pay them here
The correct value for a 102 is 7355 in newer e38s or e67. On older e38s like yours I would run 6535.
2012 ZL1 - Maggie Heartbeat, Port & Polish Heads, Custom Cam, Custom rotating assembly, steel sleeved LS9, No NOS and No water meth. 16psi
810rwhp and 820rwtq 91 Octane 6400 rpm
948rwhp and 951rwtq 105 Octane 6400 rpm
999rwhp and 997rwtq on 60% Ethanol 6400 rpm
If you have surging on start up you can increase your idle air min tables. This is more for cammed cars, but it may apply to you. You may need to adjust start up air tables as well.