Is there any documentation out there about how shift scheduling works? I mean, between Situation Mapping, Aggression Mapping, Shift Pattern, etc... That whole, "Shift Scheduling" tab in the VCM Editor is not exactly something you can look at and just know what's going on. When I put my Charger into manual mode and shift with the paddle shifters, it's great. I just wish I knew what all the settings meant in the Shift Scheduling tab so that I could program the car to shift like I would given whatever situation I'm driving in.
When the car was stock, this wasn't an issue but now I have a cam and ported heads in it and the engine is putting out 600hp. In Sport Mode, it's mostly fine but I'd love to program the car to shift a little more aggressively in standard mode. It keeps letting the RPMs drop down low, like just over 1,000rpm in high gears and sometimes that makes the car jerk around because now the engine isn't really tuned to be in 6th gear at 40mph. If there's any guide out there about how to program that tab so it shifts how I want depending on my speed and how much I'm on the accelerator, that would be super useful information.
Thanks in advance for your time, whoever answers.