Datalogging advice 2006 Mustang saleen blower

[Mass Motorsports]

Anyone have suggestions on what channels to monitor for datalogging?

Long story short, Im new to tuning and my car was previously tuned by Triangle. Swapped the 5r55 to a 4R70 and now i need to go in and turn off the 5R switches in my tune. I cant pull my current tune and modify due to it being scrambled by SCT so im having to start from scratch.
So what im trying to do is get as much info out of my car by logging it before i start building my own tune.

Any advice is appreciated!!

[decipha]

Where are you located?

set up a histogram to plot spark advance by load and rpm

set up a histo to plot airmass and mafv

[Mass Motorsports]

I'm from Denham Springs, LA

Ill set up a few histos and give it a shot this afternoon, appreciate the quick reply.

When I'm logging, probably best to do Idle and maybe hold RPM at a few different levels? Then maybe a 3rd gear pull locked up?

Also should I do this in closed loop or both open and closed loop?

[decipha]

something told me you would be

bring the car to my shop and I'll unscramble it for you takes all of 10 minutes and u can use your tune you currently have

O&E Speed Shop
2333 Aberdeen St.
Kenner, LA 70062

Someones always here 24/7 but on night shifts all this week is a skeleton crew so call ahead if you come by after 9PM. I'll be here til 7am.

consider it a favor