Results 1 to 4 of 4

Thread: aem 30-0310 afr error histogram

  1. #1
    Tuner in Training
    Join Date
    Feb 2014
    Posts
    34

    aem 30-0310 afr error histogram

    ive got my WB connected via CAN through prolink and it works fine, I however cannot afr error to log in my histogram on a p11 pcm. Do I need to change the variable in the maths to my widebands id? How do I retrieve the ID for the wideband since its on can? Thanks!

  2. #2
    Tuner in Training
    Join Date
    Feb 2014
    Posts
    34
    Nobody? I?m driving myself crazy with this damn thing

  3. #3
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    2
    Can not help with CAN bus but can confirm it is simple to use analog with the 30-0310 and get it to populate the histogram.
    Prolink red wire 2 aem white wire and prolink black 2 aem brown, add the aem to the channel lists and translate it to EQ or AFR
    I do however have the pro license.

  4. #4
    Tuner in Training
    Join Date
    Feb 2014
    Posts
    34
    I have pro feature set and the canbus setup works great no offset voltage to deal with etc. I cannot however get afr error to log in my histogram.