I have a 2003 Ram with a 2005 pcm swap. The engine has a comp cams 260, shortie headers and a x pipe. I followed the tuning's school dodge tuning book but now I have an issue where the truck surges as idle and I cant fix it. Please help
I have a 2003 Ram with a 2005 pcm swap. The engine has a comp cams 260, shortie headers and a x pipe. I followed the tuning's school dodge tuning book but now I have an issue where the truck surges as idle and I cant fix it. Please help
What is your minimum airflow set at? Probably too high.. other possibility is you set your base pt / base minimum spark timing too high
Engine > Torque Management > Engine > Desired Spark Retard
They have you adjust this but I have found that it results in a surging idle.
There's really no reason to adjust that anyhow.
Exactly what guru1oftal said. I had the exact same thing happen by following the Tuning Schools instructions while tuning my 2016 Ram. I changed this table back to stock and the surging went away.
Thanks for the responses I will try to do the things mentioned and I will update later
sdt1update1.hpt this is my tune. It looks like putting the desired retard back to stock fixed it, but would anyone happen to know what is that retard for?
Last edited by ruly986; 09-22-2019 at 11:53 AM.
Last edited by guru1oftal; 09-23-2019 at 09:39 AM.
When I was testing with the wideband I was able to get it to run at roughly 12 to 1 and there isnt amy knock. You think I should go richer?
If you are seeing 12:1 on the wideband and no STKR I'd say you are good.
I like to run around 11.9:1 under high load for a safety margin due to the additional weight