Results 1 to 5 of 5

Thread: Scanner Parameters MED17

  1. #1
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    17

    Scanner Parameters MED17

    I have a 2011 Audi A4 2.0TQ6MT and I am looking to have a few scanner parameters added which would be very useful for tuning, I know I?m not the only one looking for these to be added and I would like to use HP Tuners as my primary program for MED17 tuning in all respects

    I would also like to use this thread as a start for other people to chime in with other params they would like to see available

    Avg. or Ind. Cyl Ignition Retard (*KW)
    Requested load (%)
    Boost pressure actual (mBar or Kpa)
    Boost pressure Request (mBar or Kpa)
    Intake camshaft angle (*KW)
    Exhaust cam lift position
    Calculated EGT model (*C)
    Wastegate Duty Cycle (%)
    Fuel injector on time (Ms)
    HPFP requested pressure (Bar)
    LPFP duty cycle (%)


    Thanks, Happy tuning 🙂

  2. #2
    Tuner in Training
    Join Date
    Oct 2017
    Posts
    30
    this are the main ones

  3. #3
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    1
    vagcom.use vcds

  4. #4
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    17
    I have VAG-com but I was looking to not switch cables while tuning/logging ��

  5. #5
    Potential Tuner
    Join Date
    Oct 2018
    Posts
    3
    would like to bump. vcm scanner is way easier to use than vagcom, just wish it had more pids available...

    2011 gti 2.0 with a k04. just logging it for now.