Equipment used MPV1 using 4.4.4
Here's what I'm seeing, any help is appreciated.
fordecu.PNG
Equipment used MPV1 using 4.4.4
Here's what I'm seeing, any help is appreciated.
fordecu.PNG
did u update your mvpi1 ? mine staryed doing this after that last update
X11 errors can be due to several reasons
1. VPP chip in MPVI is going bad/has gone bad
2. not cycling the ignition when prompted
3. issue with the ignition/ignition wiring to the PCM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
suburban isn't VPP and doesn't require the chip to be functional.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Even after the cable was fixed it still doesn't work. Only the MPVI2 will connect. After all the drama the switches to turn on and off the VATS system failed to work. All I needed to do for the runstand that I had build was to disable anti theft and unfortunately HPtuners doesn't support this ecu. Had to outsource SCT tuner and it did the trick.