3V Whipple tuned... take a look

[skythunder83]

Hi Guys,

So I did my best to tune my 3V with Whipple 2.3 that has pulley 3.625, big 4" Roush intake with SCT BA5000 and FR 62 mm, then 52 lb injectors supplied via VMP BAP. I shared my VCM view files too
Could you take a look on the tune file/datalog and let me know if I missed something
MyTune_93_OEM_SC - AllGood_Finetuning.hpt19-09-28 15-22-49.hplSets with HP.xmlGauges.Gauges_Update.xmlGraphs_Sep_2019.Graphs.xmlMustang GT 2008_Custom 2_Layout.xml

1st, 2nd & 3rd gears. and I have 4.10, FYI, the IAT is located at the SC manifold not at MAF

[B E N]

I think both sets of VCT tables IMRC open and closed should match, your IMRC is deleted.

[skythunder83]

It's already match, yes deleted, can't use them with Whipple SC

[SultanHassanMasTuning]

i think you got a little too much SPARK, also i assume some scaling has been done as your load is barely touching 1.2

[skythunder83]

I didn't touch spark as I wasn't sure if I need too, how about scaling? could you please explain..

[skythunder83]

No one

[SultanHassanMasTuning]

if your using as you mentioned 52lb injectors your data is wrong which is why your load is wrong as well.

see attachedMyTune_93_OEM_SC - AllGood_Finetuning 52lb Injectors FRP 62mm Throttle.hpt

your throttle data was wrong and injectors

[skythunder83]

Thx Sultan, will check it, the TB data I had since long time and used it the same like before! Could be it was wrong, Strang. As of the 52 lb, I agree, I thought the data I have is for 52 lb (I had this data from the forum ) but I checked it with FR 47 lb and it was the same!
The question is, I have this set 0280158117 with Ford logo and date 2007, I been told it's from GT500, and as far as I know GT500 had 47 lb, am I right?

[SultanHassanMasTuning]

2007-2012 its 47LB
2013-2014 its 52LB

[skythunder83]

Agreed... Have you had chance to look at the log? Maybe you could see something I missed