I have a 1.4 turbo out of a 2015 Trax and the 6 speed auto. I haven't gotten into the tuning yet because I can't get it to start. I built an off road buggy an put the engine and transmission in it.
I modified the wiring harness and built a relay and fuse panel. The ECM has full time power and the rest of the system is wired on the power switch. The y.ellow wire for the starter is on a push button. I have gone over it several times and can't find out what the problem is.I used the wiring harness out of Mitchell's online manual for a guide. If someone can help so I can move on to tune it. I forgot one thing the ECM is out of the Trax too.