Results 1 to 10 of 10

Thread: Dodge Charger 3.5 supercharged 2-bar assistance

  1. #1

    Question Dodge Charger 3.5 supercharged 2-bar assistance

    Need help with programming a 2-bar map to my car. I changed the tune to one that has this map sensor offset and linear values adjusted. Can someone take a look at it and let me know, what I am missing. In this I have included the stock tune and the tune for the map sensor. I also included two logs from idle to see the map and baro values. any assistance would be greatly appreciated.
    Attached Files Attached Files

  2. #2
    Still need of assist

  3. #3
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    873
    You will want to enable sensed MAP and disable baro learn. Some other changes are listed in the link below.
    https://forum.hptuners.com/showthrea...l=1#post574584

  4. #4
    Quote Originally Posted by Homer View Post
    You will want to enable sensed MAP and disable baro learn. Some other changes are listed in the link below.
    https://forum.hptuners.com/showthrea...l=1#post574584
    thanks I will check that out!!!

  5. #5
    okay I tried the figures but still doesn't help. Car starts in limp mode, cant find turn baro learn off feature. My vehicle is a 2007 Dodge charger 3.5

  6. #6
    Tuner in Training
    Join Date
    Mar 2018
    Posts
    45
    You can give this a try:

    Engine -> Airflow -> General -> Sensed MAP = Enabled
    Barometric Pressure Learning = Disabled
    Pressure Ratio PRatio Max = 2.0
    Pressure Ratio PRatio Max Turbo = 2.0

    Engine Diagnostics -> Manifold Absolute Pressure Sensor -> Airflow P2172 MAP Delta Hi = 240
    Airflow P2172 MAP Delta Lo = 240
    Barometric Pressure Sensor -> Baro Voltage Min = .08

  7. #7
    Screenshot HP tuners.png This is what my screen looks like, anyone can help me that has tuned the dodge 3.5???

  8. #8
    Any HpTuners Moderators care to chime in???

  9. #9
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    873
    That is because you are in the basic view.
    advanced.JPG

    This is what advanced view looks like.
    tables.JPG

  10. #10
    wow thank you so much for the help, Homer, still navigating myself around the programming.
    Last edited by 07SXT808Vorteched; 10-22-2019 at 11:41 AM.