-
Advanced Tuner
2018 Challenger 6.4 with EFORCE Edelbrock
hello guys
Edelbrock has not released the tune for MY 2019
I'm installing the EFORCE kit into a new Challenger A/T scat pack, 6.4 V8
someone has to share the STOCK Edelbrock tune file for MY 2018 to be used just as starting point?
thank you so much!
I appreciate
-
even if you have found one i would not recommend using their canned tunes.
start from scratch
adjust your injectors
Map sensor
Load scaling
fuel and ignition targets/adjustments
-
Advanced Tuner
-
Advanced Tuner
My experience with a "baseline" tune that come with a FI kit is they are bad. That's why it take several iterations to get them right. For example, when I installed my baseline tune, the engine would not rev past 4k rpm. It was a simple fix of updating the Park/Nuetral fuel cutoff RPM (appeared to be set-up like an automatic but I have a manual). Not to mention there were several DTCs disabled for no good reason...some of which would not let my monitors complete.
-
Advanced Tuner
hello guys
I agree with all of you but anyway I need a 2018 /2019 Challenger 6.4 liters Edelbrock tune reading.
nobody has them to share?
thank you so much!
-
post the current tune or email me [email protected]
make sure you know which MAP sensor is on the car and injectors