Results 1 to 4 of 4

Thread: 2018 Challenger 6.4 with EFORCE Edelbrock

  1. #1
    Tuner
    Join Date
    Sep 2006
    Location
    Lake of Como - Italy
    Posts
    199

    Question 2018 Challenger 6.4 with EFORCE Edelbrock

    hello guys
    Edelbrock has not released the tune for MY 2019
    I'm installing the EFORCE kit into a new Challenger A/T scat pack, 6.4 V8
    someone has to share the STOCK Edelbrock tune file for MY 2018 to be used just as starting point?
    thank you so much!
    I appreciate

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    Jeddah, Saudi Arabia
    Posts
    2,198
    even if you have found one i would not recommend using their canned tunes.

    start from scratch

    adjust your injectors
    Map sensor
    Load scaling
    fuel and ignition targets/adjustments
    E-tuning/remote Tuning Sultan@mastuning.net Follow @MASTUNING Contact/Whatsapp +966555366161
    [URL="http://www.mastuningsaudi.com"]

  3. #3
    Tuner
    Join Date
    Sep 2006
    Location
    Lake of Como - Italy
    Posts
    199
    they're so bad?

  4. #4
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    434
    My experience with a "baseline" tune that come with a FI kit is they are bad. That's why it take several iterations to get them right. For example, when I installed my baseline tune, the engine would not rev past 4k rpm. It was a simple fix of updating the Park/Nuetral fuel cutoff RPM (appeared to be set-up like an automatic but I have a manual). Not to mention there were several DTCs disabled for no good reason...some of which would not let my monitors complete.