Results 1 to 4 of 4

Thread: stalling at stops then when restarting idle is like 2500 rpm for 15-20 seconds

  1. #1
    Tuner in Training
    Join Date
    Jun 2019
    Posts
    23

    stalling at stops then when restarting idle is like 2500 rpm for 15-20 seconds

    need advise on what to do next the tune now is very good on everything except idle when stopping and when restarted rpm is 2500ish for 15-20 seconds but only when totally warmed up I disabled cracker and added more air at idle but its kicking my butt I don't want to change to much because the truck is kickbutt with tune except idle 84 c10 2000 5.3 598/602 howard cam headers CIA stock MAF MAP TURBO 400 TRANS ay advice appreciated LOG as of 10-5-19 is posted

  2. #2
    Advanced Tuner
    Join Date
    Jan 2015
    Location
    Arizona
    Posts
    426
    got to do MAF and ST/LTFT adjusmtnets, and then do the russ k idle procedure. you cant really tune your engine until those are done. Also, without a wideband youre really only tunig 4k rpms and under anything over without a wideband is guessing at your afrs

  3. #3
    Tuner in Training WAcord's Avatar
    Join Date
    Mar 2019
    Location
    Arkansas
    Posts
    21
    braf is to high ?

  4. #4
    Tuner in Training
    Join Date
    Jun 2019
    Posts
    23
    I got a wideband running but not connected to hp tuner and its running lean 18-20 on idle and ok during acceleration