2019 lt1 NA camaro with edelbrock 2650 supercharger tune file?

[TBRE]

Hi Guys, pretty new to HPT, fitting up a Edelbrock 2650 blower kit to a NA 2019 LT1 Camaro with 10 speed auto end of the week, and was just wondering if anyone may have a tune file for a similar deal they would like to share, to get us ontrack a bit quicker. many thanks to anyone who may be able to help.

[SultanHassanMasTuning]

before anything, you will need to address your fuel upgrades, minimum we you will need to swap over to LT4 fuel system

[TBRE]

Ok , The company that supplied this kit over here In Australia did one on a 2018 and ran the std fuel system with it makeing a bit over 500 rwhp. they tuned it with sct but so they don't have a startup file for HPT. we arnt aiming for anything more than 500-550 rwhp.

[SultanHassanMasTuning]

must be a very low boost pulley like 5psi or so.

[TBRE]

yer possibly, from what I can work out it pretty much takes it to a stock zl1 level there abouts, was thinking of putting all the stock zl1 values in and see how it goes to start with. was just hoping somone may have fitted one of these kits and tuned it with HPT as it would have been a better start.

[sevinn]

yer possibly, from what I can work out it pretty much takes it to a stock zl1 level there abouts, was thinking of putting all the stock zl1 values in and see how it goes to start with. was just hoping somone may have fitted one of these kits and tuned it with HPT as it would have been a better start.

Don't do that. lt4 is a lower compression engine than lt1. Quick way to run into trouble!