Results 1 to 4 of 4

Thread: Bricked ecm?

  1. #1

    Bricked ecm?

    Well, i went to put a tune on my truck this am. It got into where it starts clicking the relay. It got stuck there and controller locked up error occured. I tried redoing and still stuck in clicking state. Wtf can i do? Tried removing batt terms and touching for a while. Still stuck clicking. Damn this buggy program.
    2004.5 Cummins.
    Borgwarner 13009097047 s300sxe 63-73 compressor 63/80 super core turbine housing 80mm .83 A/R Twin Scroll Housing,
    50HP BMS/Exergy Injectors
    BD T4 manifold,
    BD CAI,
    5" turbo back exhaust,
    turbosmart ext wastegate,
    BD lift pump with 2 mic filter and h2o separator,
    banks intercooler, Banks intake horn,
    slightly built tranny.......

  2. #2
    I finally got a tune to take. Disregard. Not sure why it keeps timing out though.

  3. #3
    Banned
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    1,772
    Low battery voltage during writing can cause all sorts of issues.

  4. #4
    Yeah its wierd. Batterys are solid and always charged up. Just went for a 30 min drive to work. Truck warm. This thing will do this even if i have a charger on the batts. I think it's just a buggy program. Oh well. At least im up and running.