Results 1 to 3 of 3

Thread: e67 comp, no PE above 2,600 rpm

  1. #1
    Potential Tuner
    Join Date
    Oct 2019
    Location
    lakewood wa
    Posts
    1

    e67 comp, no PE above 2,600 rpm

    born before the computer age, 2012 Colorado 5.3 with a 1900 supercharger, it has the tune supplied by the manufacturer, VCM scanner shows PE about 1,200 rpm to 2,600rpm then gone, running 14.68, 1 bar MAP, I'm towing a travel trailer, also my throttle position sensor reads 83.9% at full throttle, pedal signal says 100%, and I know TPS should read 88% at full throttle, Is this a dumb question??? i'm lost, just bought a wide band, won't be here for 10 days, need help, UPDATE--- have hp's scanner on 2 computers, the 1 im tuning with was outdated, so i updated it, got my wide band in and guess what--- wide band says I have PE, the scanner says I have PE now, and other stuff works in the scanner works now, woopi, even the tps reads 99.6, could my scanner have been corrupted some how ?????
    Attached Files Attached Files
    Last edited by retracer; 10-23-2019 at 01:48 PM. Reason: just updating

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post the tune
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    May need to lower the map enable from 100kpa down to 90kpa instead.

    I hope the transmission is up to snuff too, that tune is pretty aggressive for a stock 4L60e.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.