Page 2 of 2 FirstFirst 12
Results 21 to 32 of 32

Thread: Generic jtec questions for hptuners support

  1. #21
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    Good point. The more I thought about this after posting, the more that filling the table with 1s looked like the better option.

    Unless there is another way to disable baro learn?

    I'm still trying to figure out what is going on in the airflow>general tab. I think Torr is a clue.

  2. #22
    Potential Tuner
    Join Date
    Aug 2018
    Posts
    7
    subscribed.

  3. #23
    Tuner
    Join Date
    May 2005
    Location
    Los Angeles
    Posts
    161
    Default baro and min valid baro.

  4. #24
    Potential Tuner
    Join Date
    May 2020
    Posts
    3
    Basic JTEC question, is internet access required?

  5. #25
    Tuner in Training
    Join Date
    Dec 2019
    Posts
    24
    Quote Originally Posted by Mopar Maniac View Post
    Basic JTEC question, is internet access required?
    Yes

  6. #26
    Potential Tuner
    Join Date
    May 2020
    Posts
    9
    Any Updates on this 2 Bar/Baro situation?

  7. #27
    Tuner in Training
    Join Date
    May 2006
    Posts
    19
    I have actually add more boost (now at 10lbs) and the baro had made an appearance and caused my tune to be erratic. I have since applied a static value throughout the table (1) to basically alleviate the problem.

  8. #28
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    5
    I have a 2004 Jeep Wrangler Rubicon that i am building a stroker 4.0. I currently have a different tuning program, but not thrilled with it. Can Hptuners correct speedometer calibration?

  9. #29
    Tuner in Training
    Join Date
    Nov 2015
    Posts
    17
    I am dying to recalibrate the speedo in my 1998 Durango!

  10. #30
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    5
    Looks like I'm going to have to call them.

  11. #31
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    Quote Originally Posted by Brianj5600 View Post
    Looks like I'm going to have to call them.
    That's a knee slapper!
    Last edited by spoolboy; 08-17-2020 at 07:17 AM.
    If in doubt, multiply everything by 1.1.

  12. #32
    Potential Tuner
    Join Date
    Aug 2019
    Posts
    5
    No sales line? I already have ability to tune all but speedo correction. I'll be buying another Jeep soon and tuning it too. I would like to switch to HPT if that feature is available. I am already used to the software I have now and it would be cheaper to stay with it and add speed healers to both. Going HPT would be cheaper if it saved me from buying boxes to calibrate speedos.