Results 1 to 5 of 5

Thread: Cam install, idle issue

  1. #1
    Potential Tuner
    Join Date
    May 2018
    Posts
    1

    Cam install, idle issue

    Really hoping someone can help with this problem I'm having with my 17 camaro SS M6. I installed a new cam/ported heads. I am getting the car remote tuned, and it runs really well, idles perfect. The issue is it can't find the idle when the car is moving and you put it in neutral. The RPM will drop to 300(sometimes stall), bounce to 1200 then idle perfect. If you are sitting still, and rev the engine it'll return to idle perfectly. I have a log and at the beginning of it, you can clearly see what the RPM's are doing.

    Wondering if anyone has seen anything of the sort before???

    Any help would be appreciated. And hopefully these attachments work.

    17 camaro SS M6 tune 15.hpt

    10.12.19.hpl

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    make sure you have calibrated both your airflow models and then move to VT
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Goat rope garage has a video coming out on this on youtube. I just watched it early on Patreon. Seems to address your issue.

  4. #4
    Goat Rope is awesome

  5. #5
    Tuner in Training
    Join Date
    Jun 2018
    Posts
    43
    Quote Originally Posted by Poppacapp View Post
    Goat Rope is awesome
    Agreed!