Results 1 to 3 of 3

Thread: Different shiftpoints for 1-2

  1. #1
    Tuner in Training
    Join Date
    Nov 2016
    Location
    Austria/Europe
    Posts
    46

    Different shiftpoints for 1-2

    Hello, when I start from 0 mph shiftpoint for 1-2 is about 5300 rpm. When I do kick down at a about 35 mph, trans will go to first gear and shift to 2nd at 6800 rpm as programed and as I want to. I got a new tune from a friend, working great but this problem I can?t solve.
    Any idea what I should change?
    Attached Files Attached Files
    300C, 5.7, AWD, 2005. now 6.1 Block, 428 Stroker Kit, Thitek Heads, Procharger D-1S, American Headers Longtube, Fox Catback, extra Oilcoolers, H&R thread chassis, Pedders Bushings, Pedders Sway Bar front, Speedlogix Front Strut Tower Brace+Matrix Brace Subframe Connectors, 245/40 20 Tires, Movit Breaks, 370x35 6 Pistons Front, 345x32 4 Pistons Rear

  2. #2
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    It's using a different map for kickdown shiftpoints than it is for regular upshifts. Figure out what the other map is and make them both the same if that is your goal.

  3. #3
    Tuner in Training
    Join Date
    Nov 2016
    Location
    Austria/Europe
    Posts
    46
    I have been looking for this other map but can?t find it. I?ll go on
    300C, 5.7, AWD, 2005. now 6.1 Block, 428 Stroker Kit, Thitek Heads, Procharger D-1S, American Headers Longtube, Fox Catback, extra Oilcoolers, H&R thread chassis, Pedders Bushings, Pedders Sway Bar front, Speedlogix Front Strut Tower Brace+Matrix Brace Subframe Connectors, 245/40 20 Tires, Movit Breaks, 370x35 6 Pistons Front, 345x32 4 Pistons Rear