Results 1 to 3 of 3

Thread: Different shiftpoints for 1-2

  1. #1
    Potential Tuner
    Join Date
    Nov 2016
    Location
    Austria/Europe
    Posts
    9

    Different shiftpoints for 1-2

    Hello, when I start from 0 mph shiftpoint for 1-2 is about 5300 rpm. When I do kick down at a about 35 mph, trans will go to first gear and shift to 2nd at 6800 rpm as programed and as I want to. I got a new tune from a friend, working great but this problem I can?t solve.
    Any idea what I should change?
    Attached Files Attached Files
    300C, 5.7, AWD, 2005. now 6.1Block, 392 Stroker Kit, Apache Heads, American Headers Longtube, Fox Catback, extra Oilcoolers, H&R thread chassis, Pedders Bushings, Pedders Sway Bar front, Speedlogix Front Strut Tower Brace+Matrix Brace Subframe Connectors, 245/40 20 Tires, Movit Breaks, 370x35 6 Pistons Front, 345x32 4 Pistons Rear

  2. #2
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    294
    It's using a different map for kickdown shiftpoints than it is for regular upshifts. Figure out what the other map is and make them both the same if that is your goal.

  3. #3
    Potential Tuner
    Join Date
    Nov 2016
    Location
    Austria/Europe
    Posts
    9
    I have been looking for this other map but can?t find it. I?ll go on
    300C, 5.7, AWD, 2005. now 6.1Block, 392 Stroker Kit, Apache Heads, American Headers Longtube, Fox Catback, extra Oilcoolers, H&R thread chassis, Pedders Bushings, Pedders Sway Bar front, Speedlogix Front Strut Tower Brace+Matrix Brace Subframe Connectors, 245/40 20 Tires, Movit Breaks, 370x35 6 Pistons Front, 345x32 4 Pistons Rear